User's Manual

WDS Bridge Mode
In WDS Bridge Mode, the AP/CPE can wirelessly connect different LANs by configuring the MAC address and security
settings of eachAP/CPE device.Use thismodewhen two wired LANs located asmall distance apartwant to communicate
with each other. The best solution is to use the AP/CPE to wirelessly connect two wired LANs, as shown in the following
diagram.
WDSBridge Modecan establish up to four WDSlinks, creating a star-like network.
Note: WDSBridge Mode does not act as an Access Point. Access Points linked by WDSare using the same frequency
channel. More Access Points connectedtogether maylower throughput.
AP
WDSBridge
30
AP
WDSBridge-
AP
WDSBridge-
Client
Computer
Client
Computer
Client
Computer