User's Manual

Wireless Settings
*The model name will be varied by different models.
Device Name: Enter a name for the device. The name you
type appears in SNMP management. This name is not the
SSIDandis not broadcastto other devices.
Save:ClickSave to confirmthe changes.
EnJet
The AP/CPE is default EnJet enable. When enable the
EnGenius EnJet system, the AP/CPE canthen transmitdata
more efficiently, avoid collisions, and reduce latency and
packet losses. (If you do not enable EnJet, data will be sent
via traditional CSMA.)
Wireless
41