manual

EnGenius EOC2611P Version 1.0
31
4.5.5 FirmwareUpgrade
 This page is used to upgrade the firmware on the device. Make sure that downloaded the
appropriatefirmwarefromyourvendor.



 Click on the Browse button and then select the appropriate firmware and then click on the
Upgradebutton.

Note:Theupgradeprocessmay take about1minute to complete.Do notpoweroff thedevice
during this process as it may crash the device and make it unusable. The
 device will restart
automaticallyoncetheupgradeiscomplete.



4.5.6 TimeSettings
 This page allows you to configure the time on the device. You may do this manually or by
connectingtoaNTPserver.



 ManuallySetDateandTime:Specifythedateandtime
 AutomaticallyGetDateandTime:Selectthetimezonefromthedropdownlistandthenspecify
theIPaddressoftheNTPserver.
 ClickontheApplybuttontosavethechanges.

