manual

EnGenius EOC2611P Version 1.0
85
7.6.4 FirmwareUpgrade
 This page is used to upgrade the firmware on the device. Make sure that downloaded the
appropriatefirmwarefromyourvendor.



 Click on the Browse button and then select the appropriate firmware and then click on the
Upgradebutton.
Note:Theupgradeprocessmay take about1minute to complete.Do notpoweroff thedevice
during this process as it may crash the device and make it unusable.
The device will restart
automaticallyoncetheupgradeiscomplete.


7.6.5 TimeSettings
 ClickontheTimeSettingslinkundertheManagementmenu.Thispageallowsyoutoconfigure
thetimeonthedevice.YoumaydothismanuallyorbyconnectingtoaNTPserver.



 ManuallySetDateandTime:Specifythedateandtime
 AutomaticallyGetDateandTime:Selectthetimezonefromthedropdownlistandthenspecify
theIPaddressoftheNTPserver.
 ClickontheApplybuttontosavethechanges.

