User manual

~31~
the SILENT key operation is valid only for the current call.
2. If Caller ID service is available, the LCD will display the
incoming call information. If the LCD shows “Private” or
“Unknown”, the caller’s information may have been blocked by
the caller or the originating phone company.
B. Base
1. When an incoming call arrives, the ringer will ring, the speaker LED will
flash.
2.
Press the
to answer the call.
Receiving an Intercom Call
A. Intercom Call from Handset
1.
When an intercom call arrives (called from other
handsets, ex. Handset 12), the ringer will ring or
vibrate unless the ringer has been turned off. Press
to answer the intercom call.
2.
If the handset is on the charger cradle (ringer will be
temporarily switched to “Ring” if it has been set to
“Vibrate”), lift the handset and start conversation.
3.
If the handset is not on the cradle, press any key (except
and the
SILENT soft key) to answer.
Notes:
1. The LCD displays the caller’s Handset ID.
2. You can press the SILENT (Left) soft key if you choose to ignore
the call. Unlike turning off the ringer the SILENT key operation is
valid only for the current call.
B. Intercom Call from Base
1.
When an intercom call arrives (called from Base), the
ringer will ring or vibrate unless the ringer has been
turned off. Press
to answer the intercom call.
2.
If the handset is on the charger cradle (ringer will be
temporarily switched to “Ring” if it has been set to
“Vibrate”), lift the handset and start conversation.
~32~
Ending a Call
A. from Handset
To end a telephone or intercom call, press
key, or place handset into
charger cradle.
B. from Base
To end a telephone call, press
key. To end a intercom call, press
key.
Adjusting Handset Receiver (Earpiece) Voice Volume
1. Voice volume can only be adjusted during a call.
2. There are 6 levels of volume selections. Default = 3.
Use
or key to adjust
3. The new setting remains effective for all future calls
until changed.
00:00:15
Volume: 3
11
MUTE OPTION
1
Adjusting Handset Speakerphone Voice Volume
1. Voice volume can only be adjusted during a call.
2. There are 6 levels of volume selections. Default = 3.
Use
or key to adjust
3. The new setting remains effective for all future calls
until changed.
Adjusting Base Speakerphone Voice Volume
1. Voice volume can only be adjusted during a call.
2.
There are 6 levels of volume selections. Default = 3. Use
or
key to adjust
3. The new setting remains effective for all future calls until changed.