User manual

~37~
Consequently, it cannot de-subscribe a handset from a group.
3. When an outside line or an intercom caller enters a group ID, all
handsets subscribed to this group will ring. The first handset to
answer will establish a link with the caller. Afterward, it is a one-
to-one call, not a one-to-many call.
Call Transfer
While a telephone call is in progress, you can transfer it between different
handsets or transfer to base.
Direct transfer from handset
1.
Press
key to put the call on hold.
2.
Press XFER (Right) soft key, followed by the
destination handset ID or BASE (Left), then the held
call will be transferred directly.
After the call transferred to destination handset or
Base, the original handset will go back to standby
mode automatically.
00:00:15
Volume: 4
11
MUTE OPTION
1
Indirect transfer from handset
If you want to talk to the destination handset or Base
before the call transferred, you can follow with below
method:
1.
During the call, press
key, followed by entering
the destination handset ID or BASE (Left).
00:00:15
Volume: 4
11
MUTE OPTION
1
2.
Press the or of the destination handset or
press the
key of base to answer the intercom
call, you can now talk to the destination handset. After
the talking, press
to end the intercom call, then the
destination handset is able to pick up the incoming call.
After the call transferred to destination handset or
Base, the original handset will go back to standby
mode automatically.
~38~
Direct transfer from base
1.
Press base
key to put the call on hold.
Re: When call on hold, the base In Use & speakerphone LED
will be flashing.
2.
Enter the destination handset ID followed by
key,
the destination handset will ring, press
or key
of
destination handset to pick up the call.
After the call pick up by destination handset, the base
will go back to standby mode automatically.
Indirect transfer from base
If you want to talk to the destination handset before the
call transferred, you can follow with below method:
1.
Press the destination handset ID followed by the base
key to intercom the destination handset.
2.
Press the
or of the destination handset to answer
the intercom call, you can now talk to the destination handset.
After the talking, press base
to end the intercom call,
then the
destination handset will pick up the held incoming
call.
Notes: If the destination handset does not answer after handset
paging timeout, the call is routed back to the originating handset.
Phonebook Operations
1. You can store up to 50 entries in the phonebook.
Each entry can contain a phone number or handset ID
(up to 26 digits) and a name (up to16 characters).
2.
To access the phonebook, press MENU (Right) soft
key, follow by “2”; or press
scrolling key while the
handset is in standby mode.
3. To add a new entry:
a.
Press ADD (Left) soft key.
b. Enter the name when LCD prompts “Name?” Use