Specifications

Conguring Advanced Settings

Allows you to dene the Advanced Settings available on the router.

To view the Advanced settings, click Wireless then select Advanced.

Fragment Threshold

Enter the maximum size of a packet during data transmission.

A value too low could lead to low performance.

RTS Threshold

Enter the RTS threshold. If the packet size is smaller than the

RTS threshold, the router does not use RTS/CTS to send the

data packet.

Beacon Interval

Enter the beacon interval. This is the amount of time that the

router sets to synchronize the network.

Delivery Trafc Indication Message (DTIM) Period

Enter the DTIM period. The DTIM is a countdown period informing clients of the next point

of broadcast and multicast of messages over the network. Valid values are between 1 and 255.

N Data Rate

Select the N data rate. This is the rate in which the ESR Series Router will transmit data packets to wireless N compatible devices.

WARNING! Incorrectly changing these settings may cause the device to stop functioning. Do not modify

the settings in this section without a thorough understanding of the parameters.