Specifications

62
Access Point Mode
Theseinstructionsapplytoboththe2.4GHzand5GHzfrequencybands.
TherouterbydefaultisalreadyconguredinAccessPointMode.Foroptimumconnectivitytoanumberofdifferentwirelessclient
devices,it’srecommendedthatyoukeeptherouterinitsdefaultwirelesssettings.Youcanchoosetohavetherouterassociate
onlywithcertainiterations(IEEEstandards)andbydoingsothiswilleitherpositivelyornegativelyaffecttherouter’sspeedand
throughput performance.
Band
Selectawirelessstandardforthenetworkfromthefollowing
options:
• 2.4GHz(IEEE802.11b)
• 2.4GHz(IEEE802.11n)
• 2.4GHz(IEEE802.11b/g)
• 2.4GHz(IEEE802.11g)
• 2.4GHz(IEEE802.11b/g/n)
• 5GHz(IEEE802.11a)
• 5GHz(IEEE802.11n)
• 5GHz(IEEE802.11a/n)
Enable SSID#
Selectthenumberofwirelessgroups,betweenoneandfour,
availableonthenetwork.
SSID[#]
Enterthenameofthewirelessnetwork(s).
Auto Channel
Enableordisablehavingtherouterautomaticallyselecta
channelforthewirelessnetwork.AutoChannelisenabledby
default.Selectdisabletomanuallyassignaspecicchannel.
(Default=Disable)
Check Channel Time
WhenAutoChannelisenabled,selectatimeperiodthatthe
system checks the appropriate channel for the router.
Channel
WhenAutoChannelisdisabled,selectachanneltoassignto
thewirelessnetwork.Validvaluesarefromonetoelevenin
the US and one to thirteen in the EU.