User's Manual

Ceiling Mount an Access Point

1)SlidetheceilingmountbaseintotheslotoftheAccess

Point.

2)HoldtheAccessPointwithonehandtoreachtheother

hand over the T-Rail sides of the bracket. Then hook the

stationary end of the ceiling mount bracket onto the

T-Rail.

Wall Mount an Access Point

3)ContinuedfromA,determinewheretheAccessPoint

to be placed and mark location on the surface for the two

mountingholes.Usetheappropriatedrillbittodrilltwo

8.1mm diagram and 26mm depth holes in the markings

and hammer the bolts into the openings.

4)Screwtheanchorsuntotheholesuntiltheyareush

with the wall ; screw the included screws into the anchors.h

5)PlacetheAccessPointagainstwallwiththemounting

screw heads.