User Manual Business Solutions EWS375AP version 1.
IMPORTANT To install this Access Point, please refer to the Quick Installation Guide included in the product packaging. The equipment is for indoor use only and the used PoE devices is considered not likely to connect to an Ethernet network with outside plant routing, including campus environment.
Table of Contents Wireless MAC Filtering.................................................................41 Chapter 8 Management........................................................ 43 Management VLAN Settings.................................................. 44 Advanced Settings....................................................................... 45 Time Zone........................................................................................ 48 Auto Reboot Settings......................
Chapter 1 Product Overview 4
Introduction - EWS375AP Key Features ・Deploy and manage with ease using EWS Series Wireless Management Switches ・Supports IEEE802.11ac/a/b/g/n wireless standards ・Four 2.4 GHz Metal PIFA (Omni-directional) ・Four 5 GHz Metal PIFA (Omni-directional) ・Support Wave 2 MU-MIMO function ・Support Tx Beamforming to enlarge the transmitting distance. ・IEEE802.11 PoE af Input design with Gigabit port supports. ・Flexible application by the built-in 2nd LAN port.
System Requirements The following are the Minimum System Requirements in order configure the device: • Computer with an Ethernet interface or wireless network capability • Windows OS (XP, Vista, 7, 8), or Mac OS, Linux-based operating systems • Web-browsing application (i.e.
Technical Specifications - EWS375AP Radio Specification Internal Antenna - 4 x 2.4GHz antennas - 4 x 5GHz antennas Interface: - 2 x 10/100/1000Mbps Uplink Port with 802.3af/at PoE - 1 x DC power connector - 1 x Reset button Dimensions: 20 x 20 x 4.5cm (7.87” x 7.87” x 1.77”) Mounting: - Ceiling mount Environment: - Operating temperature: 0°C~40°C - Operating humidity: 0%~90% typical - Storage temperature: -30°C~80°C Dual Concurrent Radio: -2.
Technical Specifications - EWS375AP continued QoS: - Supports 802.
Physical Interface (EWS375AP) 1 5 6 4 3 2 5 1. LED Indicators: LEDs for Power, LAN-1, LAN-2, 2.4Hz, 5GHz 2. Ceiling (Wall) Mount Hole: Using the provided hardware, the EWS375AP can be attached to a ceiling or wall. 3. Reset Button: Press and hold for over 10 seconds to reset to factory default settings. 4. LAN2 :10/100/1000 RJ45 5. LAN1 : 10/100/1000 RJ45 Uplink (PoE In)that supports 802.3af/at PoE input 6.
