Users Manual
44
Management VLAN Settings
This page allows you to assign a VLAN tag to packets sent
over the network. A VLAN is a group of computers on a
network whose software has been congured so that they
behave as if they were on a separate Local Area Network
(LAN). Computers on VLAN do not have to be physically
located next to one another on the LAN.
Note: Only applicable in Access Point and WDS AP modes.
Management VLAN: If your network includes VLANs, you
can enable Management VLAN ID for packets passing
through the Access Point with a tag.
Save: Click Save to conrm the changes or Cancel to
cancel and return to previous settings.
Note: If you recongure the Management VLAN ID, you
may lose your connection to this AP. Verify that the
DHCP server supports the recongured VLAN ID and then
reconnect to this AP using the new IP address.
MGMT VLAN Settings