User's Manual

Wireless MAC Filtering

Wireless MAC Filtering is used to allow or deny network

access to wireless clients (computers, tablet PCs, NAS,

smartphones,etc.)accordingtotheirMACaddresses.You

can manually add a MAC address to restrict permission to

access this AP. The default setting is: Disable Wireless

MAC Filter.

Note:  Only applicable in Access Point and WDS AP

modes.

ACL Mode: Determines whether network access is granted

or denied to clients whose MAC addresses appear in the

MACaddresstableonthispage.Yourchoicesare:Disabled,

Deny MAC in the list, or Allow MAC in the list.

MAC Address: Enter the MAC address of the wireless client.

Add: Click Add to add the MAC address to the MAC address

table.

Delete: Delete the selected entries.

Save: Click Save to apply the changes.