User's Manual

57
Managed Access Point Installation with Wireless Management Switch
1. Connecting the Access Point
(ThroughEnGeniusWirelessManagementSwitch)
A)  Connect one end of the Ethernet Cable into an
Ethernet Port on the front panel of the EnGenius Wireless
Management Switch and the other end to the Ethernet
Port on the computer.
B) ConnectanotherEthernetCableintotheLANPortof
the Managed AP and the other end to the Ethernet Port
on the Wireless Management Switch. With the Wireless
Management Switches, the Managed AP is able to obtain
properassignedIPaddressforfurthercongurations.
2.IPAddressConguration
A)Onceyourcomputerison,ensurethatyourTCP/IPisset
toOnorEnabled.OpenNetworkConnectionsandthenclick
Local Area Connection. Select Internet Protocol Version 4
(TCP/IPv4)
B)Ifyourcomputerisalreadyonanetwork,ensurethat
you have set it to a Static IP Address on the interface.
(Example:192.168.0.88andtheSubnetMaskaddressas
255.255.255.0.)