Operation Manual

LACP (Link Aggregation Control Protocol) Settings

Assign a system priority to run with Link Aggregation

Control Protocol (LACP) and is become for a backup link

if a link goes down. The lowest system priority is al-

lowed to make decisions about which ports it is actively

participating in in case a link goes down. If two or more

ports have the same LACP port priority, the port with

the lowest physical port number will be selected as the

backup port. If a LAG already exists with the maximum

number of allowed port members, and LACP is subse-

quently enabled on another port using a higher priority

thananexistingmember,thenewlyconguredportwill

replace the existing port member that has a lower priori-

ty. A smaller number indicates a higher priority level. The

range is from 0-65535 and default is: 32768.

System Priority:

Enter the LACP priority value to the

system. The default is 32768 and the

range is from 1-65535.

Apply: Click APPLY to update the the system settings.