Operation Manual

13 / 60
Setting up ezMaster Server
1. After launching the image, once the installation script finishes running, you will be prompted to enter
login and password for ezMaster. For login enter admin, for the password enter password.
2. Once the ezmaster# command prompt appears, start entering network settings for your ezMaster
server.
(Tip: Use Network Adapter Properties to check the info of your network adapter.)
*network settings below are for reference example use.
a) Enter ezMaster Server IP and Netmask:
config ip eth0 10.0.92.70 255.255.255.0
(eg. LAN Adapter IP is 10.0.92.69 so an unused IP Address 10.0.92.70 is chosen to be used as
ezMaster's server IP address)
b) Enter ezMaster Server gateway:
config gateway 10.0.92.254
c) Enter ezMaster DNS Server:
config dns 10.0.92.240
You have completed installing ezMaster.