Operation Manual

19 / 60
Managing devices using ezMaster
In order to start managing and monitoring Neutron devices, these devices must first be added to a project.
1. Make sure that your Neutron device is connected to a network with a DHCP server and can access the
Internet.
2. Click on the “Project” icon to create a new project. A ‘Project’ is similar to a ‘profile’ which can be used
to classify/represent different sites or floors of your deployment.
3. Click on “Create New Project” and enter a project name and description. Click on Apply when you
are done.
4. You'll be automatically redirected to the ‘Pending Approval’ list after successfully creating a profile.
The ‘Pending Approval’ list will display a list of AP/switches in your local network (same network as
ezMaster) and also remote AP/switches claimed by ezMaster.
5. Select the AP(s) you wish to add to your profile by selecting the checkbox and click on the “Add”
button.
6. You'll be automatically redirected to the device page. Once the AP is online (green), to configure your
AP, click on the ‘Device Name’ link of your AP to bring up the configuration menu.