Operation Manual

25 / 60
Email Alert
If an event is detected, ezMaster will record it in the event log. ezMaster can also be configured to send
email notifications upon detecting selected events.
Mail Alert State: Select whether to Enable/Disable email notification.
Mail Information Setting
 SMTP Server: Enter the name of the mail server.
 SMTP Port: Enter the SMTP port.
 SSL/TSL: Enable this option if your mail server uses SSL/TLS encryption.
 Authentication: Select this option to enable authentication.
o User Name: Enter the username required by the mail server.
o Password: Enter the password required by the mail server.
 From Mail Address: Enter the email address that will appear as the sender of the email alert.
 To Mail Address: Enter the email address which the ezMaster will send alarm messages to. You can
only send alarm messages to a single email address.
 Subject: Enter the subject of the email notification.
 Event: Select the types of events which ezMaster will send an email notification.
Test: Used to verify that ezMaster can send email notifications using the SMTP settings you configured.
Apply: Click Apply to save settings.
Remote Logging
The internal log of ezMaster has a fixed capacity; at a certain level, ezMaster will start deleting the oldest
entries to make room for the newest. If you want a permanent record of the logs, you can set up a syslog