Operation Manual

32 / 60
Access Point
Dashboard
The Dashboard on the upper right shows the current number of APs that is being managed by the selected
project.
Remove
The Remove button removes selected Access Point(s) from the project. Access Points removed will be
automatically set to standalone mode with all settings restored to their factory default settings, and will
appear in the Pending Approval list.
Reboot
The Reboot button reboots the selected Access Point(s).
Search Bar
Use the Search Bar to search the list of managed Access Points using the following criteria: Status, model
name, MAC Address, Device name, IP address, Firmware Version, Group.
Status
This indicates the current status of the managed Access Point.
Status
Explanation
Online
AP is connected and managed by ezMaster.
Provisioning
AP is currently in the process of connecting to ezMaster.
Applying Change
AP is currently applying system changes.
Connecting
AP is currently connecting to ezMaster.
Offline
AP is currently offline.
Resetting
AP is resetting.
Firmware Upgrading
AP is currently undergoing firmware upgrade process.
Invalid IP
1. Unable to obtain IP address from DHCP server.
2. When using Static IP, the subnet of managed AP’s IP address is incorrect.
Incompatible Version
AP firmware is not compatible with ezMaster.
Checking Certificate
ezMaster is checking the SSL Certificate of the AP.