Operation Manual

50 / 60
Maintenance
Bulk Upgrade
The Bulk Upgrade feature allows administrators to upgrade the firmware of multiple Access Points at the
same time. After uploading the firmware of an AP, the system will automatically display a list of Access
Points the system is currently managing that the uploaded firmware is for.
To upgrade, please follow the steps below:
1. Click on Upload New File to mount AP firmware onto ezMaster's flash.
2. Once the Access Point firmware is uploaded successfully, a list of Access Points that the uploaded
firmware is for will appear in the Device List.
3. Select the Access Points you wish to upgrade and click Add to Upgrade to start the firmware upgrading
process.
Warning: Upgrading APs will temporarily disconnect all associated clients from the network. To
minimize network disruption,we recommend performing the upgrade procedure at an off-peak time.