Operation Manual

51 / 60
Access Point Configuration
Under Device Management > Device Config > Access Point, you can configure AP settings by clicking on
the Device Name link of the device.
General Settings
Device Name: The device name of the Access Point. Users can enter a custom name for the Access Point
if they wish.
Administrator Username: Displays the current administrator login username for the Access Point. Enter a
new Administrator username for the Access Point if you wish to change the username. The default
username is: admin.
New Password: Enter a new password of between 1~12 alphanumeric characters.
Verify Password: Enter the password again for confirmation.
IP Settings: Select whether the device IP address will use the static IP address specified in the IP address
field or be obtained automatically when the device connects to a DHCP server.
IP Address: Enter the IP address for the Access Point.
Subnet Mask: Enter the Subnet Mask for the Access Point.