Operation Manual

53 / 60
RTS/CTS Threshold: Enter a Request to Send (RTS) Threshold value between 1~2346. Use RTS/CTS to
reduce data collisions on the wireless network if you have wireless clients that are associated with the
same Access Point. Changing the RTS threshold can help control traffic flow through the Access Point. If
you specify a lower threshold value, RTS packets will be sent more frequently. This will consume more
bandwidth and reduce the throughput of the Access Point. Sending out more RTS packets can help the
network recover from interference or collisions which might occur on a busy network or on a network
experiencing electromagnetic interference.
Aggregation: Select whether to enable or disable Aggregation for the Access Point. This function merges
data packets into one packet, reducing the number of packets. This also increases the packet sizes, so
please keep this in mind. Aggregation is useful for increasing bandwidth throughput in environments that
are prone to high error rates. This mode is only available for 802.11n modes. Fill in the frame rate limit you
wish to use. The range is from 1~32. Next, fill in the max byte limit. The range is from 2304~65535.