Operation Manual

58 / 60
o Type: Select the WPA-PSK type to use. Available options are Mixed, WPA-PSK and WPA2-
PSK. Choose Mixed if your network has a mixture of older clients that only support WPA and
TKIP, and newer client devices that support WPA2 and AES.
o Encryption: Select the WPA encryption type you would like. Your available options are: Both,
TKIP(Temporal Key Integrity Protocol) and AES(Advanced Encryption Standard).
Note: Since TKIP is not permitted for 802.11n-based transmissions, setting the encryption
algorithm to TKIP when you are using an 802.11n or 802.11ac AP will cause the network to
operate in 802.11g mode.
o WPA Passphrase: Enter the Passphrase you wish to use. If you are using the ASCII format,
the Key must be between 8~64 characters in length.
o Group Key Update Interval: Specify how often, in seconds, the Group Key changes.
Captive Portal: Enable/disable Captive Portal for Guest Network. Refer to Section: Hotspot Service >
Captive Portal for more information.
Profile: Select to apply an existing Captive Portal Profile to the Guest Network or Create a New Captive
Portal Profile.
Manual IP Settings
 IP Address: Enter the IP address for the default gateway of clients associated to the Guest Network.
 Subnet Mask: Enter the Subnet mask for the Guest Network.
Automatic DHCP Server Settings
 Starting IP Address/Ending IP Address: Enter the pool range of IP addresses available for
assignment.
 WINS Server IP: Specify the Windows Internet Naming Service (WINS) server address for the wireless
network. WINS is a system that determines the IP address of a network computer with a dynamically
assigned IP address, if applicable.