User manual

EnGenius Mesh AP - M8000 User Manual & Configuration Guide

Page 12 of 62

Advance configuration have the following parameters:

• Maximum Session – maximum connection tracking session, a higher value is

desired to support large number of local users.

• Generic Timeout – generic timeout for a connection tracking instance

• ICMP Timeout – ICMP timeout

• TCP Close Timeout – TCP close timeout

• TCP Close Wait Timeout – TCP close wait timeout

• TCP Established Timeout – TCP established timeout

• TCP Finished Wait Timeout – TCP finished wait timeout

• TCP Last Ack Timeout – Last acknowledgement timeout

• TCP SYN Receive Timeout – TCP SYN receive timeout

• TCP SYN Sent Timeout – TCP SYN sent timeout

• TCP Time Wait Timeout – TCP Time wait timeout

• UDP Timeout – UDP timeout

• UDP Stream Timeout – UDP stream timeout

• Radio 1 distance – Desired operating distance for radio 1 ( usually refer to

mesh radio )

• Radio 2 distance – Desired operating distance for radio 2 ( usually refer to

client access radio )

• Regulatory Domain – Display the regulatory domain of the wireless interface

• Country – List of supported country available from the wireless interface.

• Outdoor Mode – Enable or disable use of outdoor mode on the wireless

interface.

• External Channel Mode – Enable or disable use of external channel mode of

the wireless interface

• “Apply” button to save any changes made. New settings are active after

reboot.

• “Reset” button to restore the settings on advance page back to factory

default settings.