User manual

EnGenius Mesh AP - M8000 User Manual & Configuration Guide
EnGenius Mesh AP - M8000 User Manual & Configuration Guide
Page 21 of 62
device reboot.
• “Edit” button to edit Active Virtual AP. AP configuration – edit page is shown
in Figure 5.4.2.
Figure 5.4.2: AP configuration – edit page
AP configuration – edit page contain the following parameter:
o ESSID – Enter the ESSID of wireless network.
o Broadcast SSID – Click on “Broadcast SSID” to enable or disable Broadcast
SSID.
o Beacon Interval – Enter the Beacon Interval value.
o RTS Threshold – Enter the RTS Threshold value.
o Fragmentation Threshold – Enter the Fragmentation Threshold value.
o DTIM interval - Enter the DTIM interval value.
o Datarate – Click on “Datarate” drop down menu to select datarate. For
example, 1 Mbps, 2 Mbps, 5.5 Mbps……
o Security - Click on “Security” drop down menu to select “Open”, “WEP”,