User manual

EnGenius Mesh AP - M8000 User Manual & Configuration Guide
EnGenius Mesh AP - M8000 User Manual & Configuration Guide
Page 22 of 62
“WPA”, Select “WEP” will display “802.1x” drop down menu and
“Encryption key” field as shown in Figure 5.4.3. While select “WPA (1 &
2)” will display “WPA Type” drop down menu, “802.1x” drop down menu
and “Encryption key” field as shown in Figure 5.4.4.
Figure 5.4.3 AP0 with WEP security selected
Figure 5.4.4: APO configuration – edit page (WPA (1 & 2))
 Open-no encrytion or security is applied.
 WEP-Wired Equivalent Privacy. A encryption using either 64-bit or
128-bit to encrypt the network packets.
 WPA-Wi-fi Protected Access is a class of systems to secure wireless
networks.
 802.1 x-Enable or disable 802.1x.
 WPA Type-Select “TKIP” type or “AES” type.
o Wireless Seperation – Click on “Wireless Seperation” drop down menu
to enable or disable wireless separation.
o “Apply” button to save any changes made. New settings are active after
the device reboot.