User manual

EnGenius Mesh AP - M8000 User Manual & Configuration Guide
EnGenius Mesh AP - M8000 User Manual & Configuration Guide
Page 24 of 62
• Netmask – Enter the IP address of destination subnet network mask.
• Gateway – Enter the gateway address.
• Direct – Click on “Direct” drop down menu to select “Direct” or “Indirect”
route.
• Device – Click on “Device” drop down menu to select device. For example,
WAN, VLAN0, VLAN1……
• Comments – Enter the interface comments.
• Active – Enable to disable this interface.
• “Apply” button to save any changes made. Please reboot to enable new
settings.