User manual

EnGenius Mesh AP - M8000 User Manual & Configuration Guide
EnGenius Mesh AP - M8000 User Manual & Configuration Guide
Page 27 of 62
6.2 Service > NTP
Network Time Protocol (NTP) is a protocol for synchronizing the system clocks over
data networks. Figure 6.2.1 illustrates the NTP configuration page.
Figure 6.2.1: NTP configuration page
NTP configuration page contains the following parameters:
• Active – Enable or disable NTP feature
• Time Zone – Select the correct time zone.
• Daylight Saving – Enable or disable daylight saving.
• “Apply” button to save any changes made.
• “Modify” button to edit current selection.
• “Remove” button to delete current selection.
• “New Entry” button to add new entry to the NTP.
Figure 6.2.2 illustrates the configuration page for add or edit NTP server settings.