User manual

EnGenius Mesh AP - M8000 User Manual & Configuration Guide
EnGenius Mesh AP - M8000 User Manual & Configuration Guide
Page 28 of 62
Figure 6.2.2: NTP – add or edit page
NTP add or edit page contains the following parameters:
• Server – Enter the NTP server name.
• Comments - Enter NTP server comments.
• Active – Click on “Active” drop down menu to enable or disable this NTP
server.
• “Apply” button to save any changes made. New settings are active after the
device reboot.
6.3 Service > RADIUS
Remote Authentication Dial In User Service (RADIUS) is an AAA (Authentication,
Authorization and Accounting) protocol for applications such as network access or IP
mobility. RADIUS client will verify authentication push by RADIUS server. Figure
6.3.1 illustrates the RADIUS client configuration page.