User manual

EnGenius Mesh AP - M8000 User Manual & Configuration Guide
EnGenius Mesh AP - M8000 User Manual & Configuration Guide
Page 29 of 62
Figure 6.3.1: RADIUS client configuration page
RADIUS client configuration page contains the following parameters :
• Active – Enable or disable RADIUS client.
• NAS ID – Enter the NAS ID.
• Called Station ID – Enter the Called Station ID.
• NAS Port – Enter the NAS Port number.
• NAS Port Type – Enter the NAS Port Type.
• Interim Update Interval – Enter the value of Interim Update Interval.
• “Apply” button to save any changes made. New settings are active after the
device reboot.
• “Modify” button to edit RADIUS server entry.
• “Remove” button to delete RADIUS entry.
• “New Entry” button to add new entry.
Figure 6.3.2 illustrates the add or edit page for RADIUS entry.