User manual

EnGenius Mesh AP - M8000 User Manual & Configuration Guide
EnGenius Mesh AP - M8000 User Manual & Configuration Guide
Page 30 of 62
Figure 6.3.2: RADIUS server – add or edit page
RADIUS server - add or edit page contain the following parameter:
• Server Name – Enter the RADIUS server name.
• Server Type – Click on “Server Type” drop down menu to select
“Authenticate” or “Accounting” server type.
• Server Port – Enter the number of Server Port.
• Server Secret – Enter the Server Secret.
• Reconfirm Server Secret – Re-enter the Server Secret to confirm it.
• Comments – Enter RADIUS server comments.
• Active – Enable or disable this entry.
• “Apply” button to save any changes made. New settings are active after the
device reboot.