User manual

EnGenius Mesh AP - M8000 User Manual & Configuration Guide
EnGenius Mesh AP - M8000 User Manual & Configuration Guide
Page 47 of 62
• Image – Enable or disable image trap report.
• Auth failure – Enable or disable authentication failure trap report.
• “Apply” button to save any changes made. Please reboot to enable new
settings.
• “Modify” button to edit trap server entry.
• “Remove” button to delete trap server entry.
• “New Entry” button to add new server entry.
Figure 7.5.2 illustrates the configuration page for add or delete trap server.
Figure 7.5.2: Trap server – add or edit page
Trap server – add or edit page contain the following parameter:
• IP – Enter destination IP to send trap.
• Community – Enter community of trap.
• Reconfirm Community – Re-enter community to confirm it.
• v3 Username – Enter v3 username.
• v3 Password – Enter v3 user password.
• Reconfirm v3 Password – Re-enter password to confirm it.
• v3 Passphrase – Enter v3 user passphrase.
• Reconfirm v3 Passphrase – Re-enter passphrase to confirm it.
• Version – SNMP Version.
• Comments – Enter Trap comments.