Installation Guide

TıleTabs
®
Modular Carpet Connectors Installation Instructions
for Nexus
®
Modular
04.2019
TileTabs Quick Reference
Installation Instructions
A) With the first module in position on
the floor, place the TileTab under the
corner of the tile with “THIS SIDE UP.”
The low tack side, labeled “THIS SIDE
DOWN,” should be in contact with the
floor, and the high tack side should be in
contact with the modular backing.
B) Lay the next carpet module onto the
exposed adhesive of the TileTab.
C) Continue laying modules and TileTabs
at the intersections of the module
corners. Apply TileTabs at edges of
modules. (See “C” diagrams.)
A.1 Peel the TileTab from the roll A.2 Place under the module
B.1 Position the next module B.2 Press it into place
A.3 “THIS SIDE UP” facing up
*Ashlar and Brick installations
generally require 35% more
TileTabs than Monolithic and
Quarter Turn installations.
C. Tile
Tab placement for
Monolithic or Quarter Turn
A
pplication
C
. Tile
Tab placement for Ashlar
or Brick Application*