Instructions / Assembly

3. Side Heat Shields

This accessory item comes

with the hardware (six (6)

mounting screws) necessary to

install it on the rear of the

stove. This is a two-piece heat

shield, but is installed one

piece at a time. There are pre-

punched holes on each side of

the Rear Heat Shield; while

holding each piece of the Side

Heat Shield in place, align the

pre-punched holes in the Side

Heat Shield with the existing

holes in the Rear Heat Shield,

and fasten with the screws

provided.

See Illustration 1 for

clearances with and without

side heat shields.

Rear Heat

Shield

Side

Heat

Shield

Side

Heat

Shield

Illustration 3 – Side Heat Shield and Optional Blower Installation

Install AC-30 Optional

Blower on these (4) mounting

holes. See “Optional

Blower” Instructions.

BRICK LAYOUT

1 – (Unmarked on diagram) – 9” x 4” x 1.25” brick (Qty. 25) 3 – 4” x 2 ½ ” x 1.25” brick (Qty. 1)

2 – 4” x 2” x 1.25” brick (Qty. 1) 4 – Metal plate (Ash Drawer Plate, Qty. 1)

Steel

Riser

All Unmarked

Brick are Size “1”