User's Manual

p. 10
ENHANCIA
01. Getting Started 02. Introducing Neova 03. The Dashboard 04. Support
figure 6: The Neova HUB’s LEDs and buttons
In its default behaviour, the Neova HUB displays the current gesture set, with each LED colour
representing one of the 4 gestures.
If the gesture is active, the LED will glow in a specific colour corresponding to the gesture type.
If the gesture is muted, the LED will instead faintly glow white.
Use the A, B, C or D buttons to mute or unmute the corresponding gesture.
The button in the top right hand corner is called the SHIFT button. It serves several functions,
depending on how you press it:
• Single press: pause or unpause
When the Neova HUB is paused, all gesture MIDI messages will be cut. It will however still
charge a docked ring and transfer the MIDI messages it receives.
• Single press and hold: slot select mode
When the Neova HUB is in slot select mode, its LED display will change, showing the active
gesture set with a bright white color.
To change the active gesture set, press the A, B, C or D button while holding SHIFT. You will no-
tice the white LED shifting to the button you just clicked.
Release the SHIFT button to return to default behaviour.
• Double press and hold: battery display mode
When the Neova HUB is in battery display mode, its LED display will change, showing the cur-
rent Ring battery with the 4 LEDs. The battery level reads left to right.
• 1 red LED means the battery is around 10%.
• 4 bright green LEDs mean the battery is fully charged.
• 4 red LEDs means the battery is empty or almost empty.
• The first LED glows blue when the ring is charging.