User's Manual

p. 8
ENHANCIA
01. Getting Started 02. Introducing Neova 03. The Dashboard 04. Support
The Ring and HUB communicate wirelessly over a 2 meters range, and should not be separated
over this distance for Neova to properly function.
Neova’s connectivity is located on the Neova HUB’s back side:
figure 2: Neova’s connectivity, located on the back of the Neova HUB
A: Mini-jack (3.5 mm) MIDI Output
B: USB type C
C: Mini-jack (3.5 mm) MIDI Input
2.2.1. Ring
The Neova Ring is the wireless device that detects your hand movement. It is composed of two
separate parts: the Stone and the Ring, that need to be assembled before you start using the
product.
In the package you received, you will find a Stone along with a set of 8 different-sized rings. Pick
the ring that fits your right index finger. It must be tight enough to not move around when you
wear it, and large enough to be removed with no effort. If a ring is too tight, please do not force
it into your finger.
Once you have found a fitting ring, assemble the stone into it: fit the stone and the ring on their
flatter side, then push down on the top of the stone, as described in the following figure:
figure 3: Assembling the Neova Ring