User manual

10
charging the battery. If the battery is completely discharged, it
may take several minutes before the charging indicator
appears on the display or before any calls can be made.
Note: Only the AC adapter and USB sync cable provided with
your device must be used to charge the device.
Connect the USB connector of the AC adapter to the sync
connector on your device, and then plug in the AC adapter to
an electrical outlet to start charging the battery.
As the battery is being charged while the device is on, a
charging icon
Appears in the title bar of the Home screen. After the battery
has been fully charged, a full battery icon appears on the title
bar of the Home screen.
Warning: • Do not remove the battery from the device while
you are charging it using the AC or car adapter.
• As a safety precaution, the battery stops charging before it
overheats.
SAR
This mobile phone is SAR accredited adheres to international
quality benchmarks and safety measures concerning the
harmful impact of radiations. It complies with applicable safety
requirements for exposure to radio waves. The radio waves
exposure guidelines employ a unit of measurement called
Specific Absorption Rate (SAR). SAR is a measure of the rate
at which energy is absorbed by the body when exposed to a
radio frequency (RF). SAR is usually averaged either over the
whole body, or over a small sample volume (typically 1g or 10g
of tissue). The recommended SAR limit for a mobile handset is