Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
FOR YOUR FURNITURE TO LAST,CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES When lock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the larger flat washer and the head of the screw or bolt. Position each part correctly and insert screws or bolts into their respective holes by hand tighten or using the proper hand tool.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
#B #A x 8pcs #B x 8pcs #1 #K #A #2 #6 #5 Insert barrel nuts (#B) into side rails (#5). Align side rails (#5,6) to the holes of the headboards (#1,2), then secure by inserting and connecting bolts (#A) to barrel nuts (#B). #B #3 #A x 8pcs #B x 8pcs #K #A #4 #8 #7 Insert barrel nuts (#B) into side rails (#7,8) to the holes of the upper headboard (#3,4), then secure by inserting and connecting bolts (#A) to barrel nuts (#B).
1) Align the back guardrail (#9) to the holes of the headboard (#3,4) and side rails (#7). Secure holes aligned to headboard (#3,4) with bolts (#C). Secure holes aligned to side rails (#7) with bolts (#E). #C x 6pcs #E x 8pcs #K #C #E #9 #10 #8 #3 #7 #E 2) Align the front guardrail (#10) to the holes of the headboard (#3,4) and side rails (#8). Secure holes aligned to headboard (#3,4) with bolts (#C). #4 Secure holes aligned to side rails (#8) with bolts (#E).
Align ladder rung (#13,14,15) to the holes of the ladder rails (#11,12), then secure with screws (#F). Place wood dowel (#J) to the center hole of ladder rail support (#16). Align ladder rail support (#16) to the holes of the ladder rail (#12), then secure with bolts (#C). #11 #F #C x 2pcs #F x 8pcs #J x 1pc #15 #12 #K #C #14 #13 #16 #K #13 #J #F Align ladder to the holes of the side rails (#7,5), then secure with bolts (#D).
Align the support legs (#17) to the holes of the slats (#19), then secure with screws (#H). #H #H x 2pcs #19 #17 Align slats (#18) to the top side rails, then secure with screws (#G). Align slats (#19) to the bottom side rails, then secure with screws (#G).
Page 10 of 10
