Owner`s manual
SPA START-UP cont...
FILLING THE SPA WITH WATER cont...
4) Fill the spa to the bottom of the pillows. of about 6-8 inches from the
top of the spa Note: DO NOT OVER-FILL YOUR TUB!
5) With the front panel off, verify there are no leaks at the pump
union. Note: Pump unions can become loose during shipping.
Verify that there are no leaks during lling of the spa.
TURNING THE POWER ON
Turn the power to the spa on at the main circuit breaker. Verify that
your spa has no error codes. (See page 12) Verify that there is good
water circulation in the spa. The pump will initially come on for 5 min-
utes minute at start up.
VERIFYING WATER CIRCULATION
1) Open all the jets.
2) Press the Pump 1 key to turn the pumps on or off.
3)Makesureeachseathaswaterow.
16