Owner`s manual

MAINTAINING YOUR SPA

PILLOW CARE

Remove and clean the pillows with soapy water and a soft cloth when

needed. Use a vinyl conditioner once a month. Remove pillows when

doing chemical shock treatment.

JET CARE

We recommended that you clean your jets when you drain

your spa.

However, if you do need to clean your jets in between this

can be

accomplished with a full spa.

1) To remove the jet inserts turn

the jet counterclockwise to the

off position until it stops.

Continue to turn the jet past the

stop point to loosen it from the

spa. The insert will now pull out.

2) Soak jet inserts in a mixture of

1 part vinegar to two parts warm

water for 2-3 hours. Periodically

rotate the spinner nozzle to

break up residue in the jets.

4) Rinse the jet inserts under warm

water.

5) To reinstall the jets insert jet into

jet body and turn clockwise until

fully seated then tug to make

sure it is seated properly. You

can then continue to turn clock-

wise until it stops.