Enli Incorporation (恩利科技) SPECIFICATION Wi-Fi 6 Dual Band Dual Current 2*2 + Bluetooth (V5.1 LE) M.2 2230 Card ENLI Ordering No. Model No. Date : ENL-Q6391M2 : ENL-Q6391M2 : 2020, Dec 3rd (Ver. #.:8.
ENL-Q6391M2 Revision History Version Date Revision Content Draft Approved 1.0 2019/11/06 New version Lgp Szs 2.0 2019/12/16 Update module number Lgp Szs 2019/12/19 Add M.2 connector information; Add RF connector information; Add key material list; Lgp Szs Lgp Szs Lgp Szs Lgp Szs Lgp Szs Lgp Szs 3.0 Add package information Update block diagram; 4.0 2020/01/04 Update module pin out figure; Update PCIe powerup timing requirements; 5.
ENL-Q6391M2 CONTENTS 1 Overview.................................................................................................................... 1 1.1 Introduction ...........................................................................................................1 1.2 Features ................................................................................................................1 1.3 Block Diagram .........................................................................................
ENL-Q6391M2 1 Overview 1.1 Introduction Enli Inc. would like to announce a low-cost and low-power consumption module which has all of the Wi-Fi and Bluetooth functionalities. The highly integrated module makes the possibilities of web browsing, VoIP, Bluetooth headsets applications. With seamless roaming capabilities and advanced security, also could interact with different vendors’ 802.11a/b/g/n/ac/ax 2x2 Access Points in the wireless LAN. The wireless module complies with IEEE 802.
ENL-Q6391M2 1.3 Block Diagram Figure 1-1 Block Diagram 1.4 General Specification Model Name ENL-Q6391M2 Product Description Support Wi-Fi/Bluetooth functionalities Dimension L x W x H: 22 x 30 x 2.2 (typical) mm Wi-Fi Interface Support PCIe BT Interface UART / PCM Operating temperature -30°C to 70°C Storage temperature -40°C to 125°C Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 1.5 Recommended Operating Rating Min. Typ. Max. Unit -30 25 70 VDD 3.15 3.3 3.45 deg.C V VDDIO_3.3V 3.15 3.3 3.45 V VDDIO_1.8V 1.71 1.8 1.89 V Operating Temperature 1.6 Power Consumption Information Test Mode Current Value @3.
ENL-Q6391M2 2 Wi-Fi RF Specification 2.1 2.4GHz RF Specification Conditions : VDD=3.3V ; Temp:25°C Feature Description WLAN Standard IEEE 802.11b/g/n/ac/ax Wi-Fi compliant Frequency Range 2412-2462MHz Number of Channels 2.4GHz:Ch1 ~ Ch11 Item Value Standard Value 802.11b /1Mbps: 20 dBm ± 2 dB EVM ≤ -9dB 802.11b /11Mbps: 20 dBm ± 2 dB EVM ≤ -9dB 802.11g /6Mbps: 20 dBm ± 2 dB EVM ≤ -5dB 802.11g /54Mbps: 17 dBm ± 2 dB EVM ≤ -25dB 802.11n HT20 /MCS0: 19.5 dBm ± 2 dB EVM ≤ -5dB 802.
ENL-Q6391M2 - MCS=7 ≤ -65 dBm ≤ -64 dBm SISO Receive Sensitivity - MCS=0 (11ac,20MHz) @10% PER - MCS=8 ≤ -83 dBm ≤ -82 dBm ≤ -63 dBm ≤ -60 dBm - MCS=0 ≤ -82 dBm ≤ -79 dBm - MCS=9 ≤ -60 dBm ≤ -55 dBm - MCS=0 ≤ -81 dBm ≤-74 dBm - MCS=11 ≤ -55 dBm ≤-52 dBm SISO Receive Sensitivity - MCS=0 (11ax,40MHz) @10% PER - MCS=11 ≤ -74 dBm ≤-71 dBm (11n,40MHz) @10% PER SISO Receive Sensitivity (11ac,40MHz) @10% PER SISO Receive Sensitivity (11ax,20MHz) @10% PER Maximum Input Level ≤ -52 dBm ≤
ENL-Q6391M2 802.11ac vHT40/MCS0: 18.5 dBm ± 2 dB EVM ≤ -5dB 802.11ac vHT40/MCS9: 15 dBm ± 2 dB EVM ≤ -32dB 802.11ac vHT80/MCS0: 18.5 dBm ± 2 dB EVM ≤ -5dB 802.11ac vHT80/MCS9: 14 dBm ± 2 dB EVM ≤ -32dB 802.11ax HE20/MCS0: 19 dBm ± 2 dB EVM ≤ -5dB 802.11ax HE20/MCS11: 14 dBm ± 2 dB EVM ≤ -35dB 802.11ax HE40/MCS0: 18 dBm ± 2 dB EVM ≤ -5dB 802.11ax HE40/MCS11: 14 dBm ± 2 dB EVM ≤ -35dB 802.11ax HE80/MCS0: 18 dBm ± 2 dB EVM ≤ -5dB 802.
ENL-Q6391M2 1 5GHz(20MHz) Channel table Operating Channel Numbers 36 40 44 48 149 153 157 161 165 Band range 5180MHz~5240MHz 5745MHz~5825MHz Channel center frequencies (MHz) 5180 5200 5220 5240 5745 5765 5785 5805 5825 RF specification will be updated in a future version of this document. 3 Bluetooth Specification 3.1 Bluetooth Specification Feature Description General Specification Bluetooth Standard Bluetooth V5.
ENL-Q6391M2 Number of Channels 79 channels Modulation GFSK, π/4-DQPSK, 8DPSK RF Specification Min. Output Power Sensitivity @ BER=0.1% for GFSK (1Mbps) Sensitivity @ BER=0.01% for π/4-DQPSK (2Mbps) Sensitivity @ BER=0.01% for 8DPSK (3Mbps) Typical. Max. 7 dBm -92 dBm -92 dBm -85 dBm GFSK (1Mbps):-10dBm Maximum Input Level π/4-DQPSK (2Mbps) :-10dBm 8DPSK (3Mbps) :-10dBm Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 4 Pin Assignments 4.1 Pin Outline Figure 4-1 Module pin out Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 4.2 Pin Definition Top side NO Name Type Description Voltage 1 GND1 - 3 NC - 5 NC - 7 GND2 - 9 NC - 11 NC - 13 NC - 15 NC - 17 NC - 19 NC - 21 NC - 23 NC - 33 GND3 - Ground 35 PERP0 I 37 PERN0 I PCIe signals 39 GND4 - Ground 41 PETP0 O 43 PETN0 O 45 GND5 - Ground 47 REFCLKP0 I 49 REFCLKN0 I PCIe clock input signal 51 GND6 Ground CLKREQ0#(I/O)(0/3.
ENL-Q6391M2 67 RESERVED_PETN1 - NC 69 GND9 - Ground 71 RESERVED_REFCLKP1 - NC 73 RESERVED_REFCLKN1 - NC 75 GND10 - Ground Bottom side NO Name Type Description Voltage 2 3_3V_1 P Power supply 3.3V 4 3_3V_2 P Power supply 3.3V 6 LED_1#(O)(OD) O WLAN LED signal 3.3V 8 PCM_CLK - BT PCM clock 1.8V 10 PCM_SYNC - BT PCM sync 1.8V 12 PCM_OUT O BT PCM data out 1.8V 14 PCM_IN I BT PCM data in 1.8V 16 LED_2#(O)(OD) O BT LED signal 3.
ENL-Q6391M2 and front-end. Active low 58 I2C_DATA(I/O)(0/1.8V) O WLAN debug UART TXD for 60 I2C_CLK(I/O)(0/1.8V) I WLAN debug UART RXD for 62 NC - 64 NC - 66 NC - 68 NC - 70 NC - 72 3_3V_3 P 1.8V 1.8V Power supply 3.3V 74 3_3V_4 P Power supply P:POWER I:INPUT O:OUTPUT PD:PULL-DOWN 3.3V Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 5 Dimensions 5.1 Module Picture 5.2 Marking Description Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 5.3 Module Physical Dimensions (Unit: mm) < TOP VIEW > Figure 5-1 Module physical dimensions Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 6 Host Interface Timing Diagram 6.1 PCIe powerup sequence timing Supports PCIe Gen 2 interface for WLAN. Compliant to PCIe Gen 2 powerup sequence timing. Figure 6-1 Powerup timing requirements Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 7 Reference Design 7.1 Reference design schematic Figure 7-1 Reference schematic C29, C30 should be closed to host. PCIe differential signals should be followed 100 Ohm impedance. For the I/O interface voltage, please refer to chapter 4.2 pin definition. For the 1.8V interface, such as PCM, UART and some I/O, if the host voltage level is 3.3V or 5V, need to add level shift circuit. Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 7.2 M.2 connector The module is standard M.2 2230 Key E double sided module. It complies with the standard M.2 2230 Key E slot. Recommended M.2 connector part number: 2199230-4 (TE connectivity). AS0BC21-S67BE-LH (Foxconn). For the mainboard PCB, it should reserve screw hole for fixing the module. Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 Figure 7-2 Recommended M.2 connector PCB outline Dimensions unit: mm Note: Refer Key ID is E Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 7.3 RF connector of module There are 2 gen 4 RF receptacle connectors on the module, for external dual band antenna. The RF receptacle connectors are complied with IPEX 4 standard. Figure 7-3 RF connector Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 8 Ordering Information Part No. Description ENL-Q6391M2 QCA6391(QCA1064), M.2 2230 E key, 2x2, 802.11a/b/g/n/ac/ax BT5.1DBS 2G&5G 9 The Key Material List Item Part Name Description 1 Inductor 2012 0.47uH,±20% Sunlord, Ceaiya, Cenker 2 Diplexer 1608 Dual-band, dual-mode 2.4GHz/5GHz WLAN Glead, Walsin, ACX, Murata, MAG.LAYERS 3 Crystal 2016 48MHz ECEC, TKD, Hosonic, JWT, TXC 4 Chipset QCA6391, QCA106X Qualcomm 5 2.4G FEM Dual FEM, 2.
ENL-Q6391M2 10 Package Information 10.1 Tray Note: The package information will be updated in next revision of this document. Layer size: L300.0*W240.0 mm Layer material: PVC Carton size: L310.0*W260.0*H220.0 mm Carton material: A=A Figure 10-1 Reference Package Sales contact: sales@enlii.com www.enlii.
ENL-Q6391M2 10.2 Moisture sensitivity The Modules is a Moisture Sensitive Device level 3, in according with standard IPC/JEDEC J-STD-020, take care all the relatives requirements for using this kind of components.
ENL-Q6391M2 Federal Communication Commission Interference Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ENL-Q6391M2 The modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed.
ENL-Q6391M2 Déclaration d’exposition aux radiations: Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This radio transmitter IC: 26176-Q6391M2 has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated.
ENL-Q6391M2 Host manufacturer is responsible for compliance of the host system with module installed with all other applicable requirements for the system such as Part 15 B, ICES 003. Host manufacturer is strongly recommended to confirm compliance with FCC/ISED requirements for the transmitter when the module is installed in the host.