User Manual

ISA 200 RAL (O) ENMET Corporation

3.0 Installation3.0 Installation

3.1 Mounting of Instrument

The ISA-200 RAL(O) should be located near the pipe or tank containing the air to be monitored, and upstream from

where the air is being used. So that, the air sample enters the instrument before it reaches the users.

Upright (plumb and level) vertical orientation of the instrument is necessary for proper operation. Mount the

instrument on an appropriate vertical surface using the mounting flanges provided. The holes in the flanges are 0.31

inch in diameter and form a 6 x 10.75 inch rectangle. See Figure 3.

ALARM

ACKNOWLEDGE

AUDIO

DEFEAT

FAULT

POWER

SELECT

OPTION

Figure 3: ISA-200 RAL(O) Mounting Dimensions

Mounting Holes

0.31” dia. 4 places