Owner's manual

ISA-44RAL-OD / ISA-44RAH-OD ENMET Corporation

9.0 Warranty9.0 Warranty

ENMET warrants new instruments to be free from defects in workmanship and material under normal use for a period of

one year from date of shipment from ENMET. The warranty covers both parts and labor; however, oxygen cells are

limited to a warranty period of six (6) months from date of shipment from ENMET. Equipment believed to be defective

should be returned to ENMET within the warranty period (transportation prepaid) for inspection. If the evaluation by

ENMET confirms that the product is defective, it will be repaired or replaced at no charge, within the stated limitations,

and returned prepaid to any location in the United States. ENMET shall not be liable for any loss or damage caused by

the improper use of the product. The purchaser indemnifies and saves harmless the company with respect to any loss or

damages that may arise through the use by the purchaser or others of this equipment.

Material shipped to ENMET for warranty evaluation must be packed so it is not damaged in shipping. This applies

particularly to oxygen cells, which must be packed so that the connector pins cannot damage the membranes of adjacent

cells, and cells cannot be damaged by the movement of other cells or items in the shipment. We strongly suggest that

oxygen cell pins be protected with a small piece of styrofoam, that individual cells be placed in small plastic bags, and

that adequate packing material be used to constrain the movement of the cells and other items during shipment. Material

damaged in shipment is not covered by warranty.

This warranty is expressly given in lieu of all other warranties, either expressed or implied, including that of

merchantability, and all other obligations or liabilities of ENMET which may arise in connection with this equipment.

ENMET neither assumes nor authorizes any representative or other person to assume for it any obligation or liability

other than that which is set forth herein.

There are Return for Repair Instructions and Form on the last pages of this manual. This Form can be copied or used

as needed.