ENMET Corporation PO Box 979 Ann Arbor, MI 48106-0979 REMOTE ALARM M ODULE 80003-061 June 2001
Table of Contents 1.0 INTRODUCTION................................................................................................................................1 1.1 Unpack................................................................................................................................................................................ 1 1.2 Check Order................................................................................................................................................
R EMOTE ALARM MODULE ENMET Corporation 1.0 Introduction The ENMET Corp. R EMOTE Alarm Module is designed to work with any control panel or sensor transmitter containing relay contacts. The alarm module is supplied with a its own power and as a SAFETY device it is recommended that the AC voltage supplied to it be from a different circuit than the power supplied to the controller or sensor transmitter.
ENMET Corporation R EMOTE ALARM MODULE 2.0 Features See figure 1 for location of features and dimensions for mounting.
R EMOTE ALARM MODULE ENMET Corporation 3.0 Installation WARNING: This equipment is not for use in hazardous combustible atmospheres as defined by the national electrical code. Use in such atmospheres may result in property damage, injury or death. WARNING: Verify that the facility circuit breaker, which supplies power to the control unit and Alarm Module, is off and tagged out before proceeding to connect the power leads.
ENMET Corporation R EMOTE ALARM MODULE 4.0 WARRANTY ENMET warrants new instruments to be free from defects in workmanship and material under normal use for a period of one year from date of shipment from ENMET. The warranty covers both parts and labor excluding instrument calibration and expendable parts such as calibration gas, filters, batteries, etc... Equipment believed to be defective should be returned to ENMET within the warranty period (transportation prepaid) for inspection.
