Use Instructions

2928
LB-0009ODF-007-00018-DES REV_03
Repeat steps 5d-5g to attach the second weekly
skin patch to your lower leg.
Now follow steps 3f-3k to attach your sensors.
5h: Repeat for the second patch
Align the new weekly skin patch with the
two lines marked on your skin and smooth down
the edges.
Then place your hand on top of the weekly skin
patch and hold for 10 seconds. This will enhance
the adhesion of the patch.
Alternatively, without skin markings
• Align the weekly skin patch along the outside
of the upper leg, at least a hand’s width
distance away from the joint center as shown
• Position the patch along the joint center
line as shown
• Place your hand on top of the weekly skin
patch and hold for 10 seconds
5g: Apply the rst patch
• Press and hold the power button on
the sensor until the status light starts
flashing green, then let go. The sensors
are now in standby mode
• Repeat for the other sensor
• Store the sensors on the wireless charger
6a: Press and hold the button
6: Turning o the sensors
You should turn o your sensors if they will not be worn for
more than a day.