Use Instructions

4342
LB-0009ODF-007-00018-DES REV_03
Sensors and daily
sensor patch
repeatedly falling o
leg
• Your daily patch needs to be replaced following
steps in section 3 in the MotionSense®
Instructions for Use:
- Remove the sensors from the leg
- Remove the daily sensor patches
- Prepare and apply a new daily sensor patch to
the sensors
- Remove the remaining backing material
- Check orientation and place sensors on the
weekly patch
Adhesives Issues
What to do if… Solution
Weekly skin patch
repeatedly falling o
leg
• Your weekly patch needs to be replaced
following the steps in section 5 of the
MotionSense® Instructions for Use:
- Remove your sensor
- Mark the location of the old patch
- Shave and clean the attachment area
- Prepare and attach a new weekly patch with
two lines marked on your skin
- Replace the daily sensor patch following steps
in section 3 of the MotionSense® Instructions
for Use
Status Check Tap the sensor button.
Turn On Press and hold the sensor button for 5 seconds
until you see the sensor light flash amber and then
let go.
Turn O Press and hold the sensor button for 10 seconds
until you see the sensor light flash green then
let go.
Button Functions
Function Button Action
Safety Information
Manufacturer
Temperature limit
Keep away from direct sunlight
Keep dry
Explanation of symbols used on labels
Refer to Instructions for Use
Icon appears inverted in white on sensors
Type BF applied part
Non sterile