Use Instructions

1110
LB-0009ODF-007-00018-DES REV_03
Guide to Parts
This pack contains:
• 2 Sensors
• 5 Week supply of patches (weekly skin patches and daily sensor patches)
• 1 Wireless charger
• 1 Power Plug and USB Cable
• 1 Skin Marker
You will also need:
• The MotionSense® App (download via the link sent to your mobile phone)
• 1 Knee Alignment Block
Sensors
The sensors monitor how you
bend and extend your knee
during exercises and daily
activity.
• The upper sensor goes on the
outside of your upper leg
• The lower sensor goes on the
outside of your lower leg
• The sensor ID and PIN are
found on the back of each
sensor (both sensors have
the same ID and PIN)
Upper Sensor
Status light
Power button
Upper sensor
graphic
Lower sensor
graphic
Sensor ID and
PIN (on rear
of sensor)
Lower Sensor
Power Plug and USB Cable
The power plug connects to the
wireless charger via the USB
cable.
The power plug pins fold out
and should be plugged into an
electrical outlet for the wireless
charger to work correctly.
Wireless Charger
The wireless charger is used to
charge the sensors at the end of
each day. The sensors will fully
charge overnight.
The USB cable plugs into the
Micro USB socket on the back of
the charger.
Weekly Skin Patches
The weekly skin patches have a white backing
and are applied directly to your shaved skin
above and below the knee.
The weekly skin patches are designed to stay
on your leg for 7 days and can be left on while
sleeping and showering. Patches are single use.
Once removed from the leg, do not reapply.
Front of charger
Back of charger
Micro USB
socket
Micro
USB
USB
USB
socket