User's Manual

To enter pairing mode manually, follow the steps below:

1. If the device is on, press and hold Ο for 2.5 second to turn off the device

2. Press and hold Ο for 5 second to power on the enophone in pairing mode

3. Once the device is in pairing mode, you will see the Bluetooth light indicator

blink between blue and white. You will also hear the voice assistant say “Ready

to pair another device”.

Your enophone can be used in multiple modes. In order to switch between the

modes, follow the steps below:

1. Ensure that the device is in stand-by mode. The Bluetooth Light Indicator

should be off, and no music should be playing.

2. While in stand-by mode, double tap Ο to switch between modes

Switching modes enable you to use the enophone in talk-through mode where you

can hear the environment around you, or turn off the Active Noise-Cancelling (ANC).