USER MANUAL Pushbutton Transmitter Device PTM 210 / PTM 215 / PTM 210 U January 10, 2013 Patent protected: US 6,747,573 US 7,019,241 Further patents pending EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 info@enocean.com www.enocean.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U REVISION HISTORY The following major modifications and improvements have been made to the first version of this document: No 1 2 Major Changes Updated operating force to typ. 8 N Merged PTM 210, PTM 215 and PTM 210U into one user manual Published by EnOcean GmbH, Kolpingring 18a, 82041 Oberhaching, Germany www.enocean.com, info@enocean.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U TABLE OF CONTENT 1 1.1 1.2 1.3 1.4 1.5 1.6 2 2.1 2.2 2.3 2.3.1 2.3.2 2.3.3 3 3.1 3.2 3.3 4 4.1 4.2 GENERAL DESCRIPTION .................................................................................... 4 Basic Functionality ........................................................................................... 4 Typical Applications .......................................................................................... 5 Technical Data ..................
USER MANUAL PTM 210 / PTM 215 / PTM 210 U 1 GENERAL DESCRIPTION The radio transmitter device PTM 21x from EnOcean enables the implementation of wireless remote controls without batteries. Power is provided by a built-in electro-dynamic power generator. The PTM 21x device serves the 868 MHz and 902 MHz radio interface protocol of EnOcean.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U In addition, the PTM telegram transmits the operating status of the contact nipples (2) when pressing the bow. This enables the identification of up to 2 appropriate switch rockers or up to 4 pushbuttons. PTM 215 supports 2 operating modes. A normal mode and a secure mode with additional rolling code mechanism which allows to prevent replay attacks in sensible applications. 1.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U 1.4 Mechanical Interface Device dimensions (inclusive rotation axis and energy bow) 40.0 x 40.0 x 11.2 mm 20 g ± 1 g Device weight Energy bow travel / operating force 1.8 mm / typ. 8 N *) at room temperature, only one energy bow may be actuated at the same time! Restoring force at energy bow typ. 0.7 N to 4 N For the correct function of the application, the specified minimal restoring force of 0.5 N must be considered! Number of operations at 25°C typ.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U Energy Bow Stopper PTM 21x without antenna, tilted view (including rocker catwalks) 1) these catwalks are not needed when using one single rocker only 2) dimensions of rocker part PTM 21x, top view (note cut A, B and C marking) EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 info@enocean.com www.enocean.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U PTM 21x, cut A 2) dimensions of rocker part PTM 21x, cut B and C EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 info@enocean.com www.enocean.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U labeling area Hatched areas: support planes PTM 21x rear view EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 info@enocean.com www.enocean.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U catwalks of switch rocker rotary rocker tilted to 5.4 degrees (corresponds to 1.8 mm energy bow travel) support plane mounting plane press bow to stopper 2) dimensions of rocker part PTM 21x, side view If the rocker is not mounted on the rotation axis of PTM 21x several tolerances have to be considered! The measure from support plane to top of the energy bow is 7.70 mm +/- 0.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U 1.5 Environmental Conditions Operating temperature -25 °C up to +65 °C Storage temperature -25 °C up to +65 °C 0% to 95% r.h. Humidity 1.6 Ordering Information Type PTM 210 PTM 215 PTM 210U EnOcean GmbH Kolpingring 18a 82041 Oberhaching Germany Ordering Code S3001-A210 S3001-A215 S3031-A210 Phone +49.89.67 34 689-0 Fax +49.89.67 34 689-50 info@enocean.com www.enocean.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U 2 2.1 FUNCTIONAL DESCRIPTION Block Diagram Data Processor HF Contact Nipples Pushed/Released Ant DC Power Energy Bow N S Power Converter Block diagram of PTM 21x Energy Bow / Power Generator Converts pressure on the energy bow into electrical energy.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U 2.2 Contact Nipples Designation With 4 contact nipples, the PTM 21x offers 2 channels with 4 action states each (upper/lower nipple is pressed/released when activating the energy bow). The nipples’ designation is as follows: STATE O A CHANNEL B I Contact nipple designation 2.3 Operating modes There are 2 operating modes: Normal mode: PTM 210, PTM 210U and PTM 215 Secure mode: PTM 215 After production, PTM 215 is set to “normal mode”.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U 2.3.2 Secure mode (PTM 215) In secure mode, PTM 215 sends telegrams with rolling code as specified in the “Security of EnOcean Radio Networks” specification. When telegrams are not received by the receiver this may lead to a de-synchronization of transmitter and receiver. In order to prevent failure, the receiver will usually test if the rolling code is in a defined window and will resynchronize automatically.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U The rolling code is not transmitted with every telegram. It is only transmitted during teach-in. Afterwards the receiver has to increase the counter autonomously. It is strongly recommended to use PTM 215 in secure mode only in fixed installations with safe radio distance. Otherwise it could happen that the rolling code of PTM 215 and the receiver get out of synchronization.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U 3 3.1 APPLICATIONS INFORMATION Construction of application specific Switch Rockers For CAD system development support, 3D construction data is available from EnOcean (IGS data). Using this data, the mechanical interface is fixed, and the shape and surface of the rocker(s) can be changed according to requirements. Recommendation for suitable rocker material is polycarbonate (buckling resistant and wear-proof material).
USER MANUAL PTM 210 / PTM 215 / PTM 210 U 3.3 Transmission Range The main factors that influence the system transmission range are type and location of the antennas of the receiver and the transmitter, type of terrain and degree of obstruction of the link path, sources of interference affecting the receiver, and “dead” spots caused by signal reflections from nearby conductive objects.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U 4 4.1 AGENCY APPROVALS PTM 210 and PTM 215 CE Approval The devices bear the EC conformity marking CE and conform to the R&TTE EU-directive on radio equipment. The assembly conforms to the European and national requirements of electromagnetic compatibility. The conformity has been proven and the corresponding documentation has been deposited at EnOcean.
USER MANUAL PTM 210 / PTM 215 / PTM 210 U 4.2 FCC and Industry Canada Regulatory Statements FCC ID: IC: SZV-PTM210U 5713A-PTM210U This device complies with part 15 of the FCC rules and Industry Canada ICES- 003. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.