User's Manual

USER MANUAL
EnOcean GmbH
Kolpingring 18a
82041 Oberhaching
Germany
Phone [phone]
Fax [phone]
[e-mail]
www.enocean.com
Subject to modifications
PTM 210 / PTM 215 / PTM 21U User Manual
January 2012
Page 5/19
PTM 210 / PTM 215 / PTM 210 U
In addition, the PTM telegram transmits the operating status of the contact nipples (2)
when pressing the bow. This enables the identification of up to 2 appropriate switch rockers
or up to 4 pushbuttons.
PTM 215 supports 2 operating modes. A normal mode and a secure mode with additional
rolling code mechanism which allows to prevent replay attacks in sensible applications.
1.2 Typical Applications
 Building installation
 Industrial automation
 Consumer electronics
Key applications are wall-mounted flat rocker switches with 1 or 2 rockers, as well as
handheld remote controls with up to 4 single pushbuttons. Because the RF transmitters are
self-powered (no batteries), maintenance-free RF systems are possible.
1.3 Technical Data
Power supply power generation by rocker operating,
electro-dynamic power generator
Antenna internal PCB antenna
Frequency PTM 210: 868.300 MHz (ASK)*
PTM 215: 868,300 MHz (ASK)*
PTM 210U: 902,875 MHz (FSK)
Data rate 125 kbps
Channels 2 with 4 action states each
upper/lower pushbutton is pressed/released
EnOcean Equipment Profile supported EEP F6-02-xx, F6-04-xx
Security mode rolling code with AES128 (PTM 215 only)
Transmission range typ. 300 m free field, typ. 30 m indoor
Device-identifier individual 32-bit ID (factory programmed)
*) According the international standard for energy harvesting wireless radio protocol for self-powered applications:
ISO/IEC 14543-3-10