User's Manual

USER MANUAL V0.9
EnOcean GmbH
Kolpingring 18a
82041 Oberhaching
Germany
Phone [phone]
Fax [phone]
[e-mail]
www.enocean.com
Subject to modifications
PTM 210 / 210C step EA User Manual V0.9
October 18, 2011 4:33 PM
Page 14/17
PTM 210 / 210C STEP EA
Example of a well suited antenna
3.2 Construction of application specific Switch Rockers
For CAD system development support, 3D construction data is available from EnOcean (IGS
data). Using this data, the mechanical interface is fixed, and the shape and surface of the
rocker(s) can be changed according to requirements. Recommendation for suitable rocker
material is polycarbonate (buckling resistant and wear-proof material). It is recommended
to apply teflon varnish in the areas of actuation.
Please note that the rockers should be of nonmetal for best transmission range!
Please also avoid plastic materials with conducting ingredients like graphite!
3.3 Device Mounting
For mounting the PTM 210 device into an application specific case, the package outline
drawings of the device are roughly dimensioned in chapter 1.4. If more detailed dimension-
ing data device case is necessary, 3D construction data is available from EnOcean (IGS
data).

Mounting the module back side on metal surfaces directly or mounting the module
into metal frames can lead to up to typical 30% loss of transmission range within
a building.